1. Redhat局域网安装的解决办法2

2. [10-10 23:22:12]   来源：http://www.85jc.com  网络故障   阅读：8933次

概要： 4。配制VSFTP，FVSFTP的运行有两（电脑没声音）种模式，一种是stardard "initd模式，另外一种是xinetd模式，上面我们所说的就是stardard initd运行模式。两（电脑没声音）种模式运行机制不是相同的，stardard initd模式，适合专业FTP，且FTP总是一直有人访问，占用资源也是比较大，如果您的FTP总是有人访问和登入。就要用这种模式。如果您的FTP访问人数比较小，建议您用xinetd模式。Xinetd模式，是当用户请求时，vsftpd才会启动。 不同的环境，当然得用不同的启动模式。 如果想了解更多的，请在本帖后面跟帖，我会慢慢补充xinetd模式，以及虚拟用户如何设置方面的问题。 1]我们主要把vsftp的配制文件改一下就行了。配制文件在/etc/vsftpd/vsftpd.conf，用您喜欢的编辑器打开。请参考下面的配制文件。 # Example config file /etc/vsftpd.conf # # The default compiled in settin

Redhat局域网安装的解决办法2,标签：网络故障解决,网络故障排除,http://www.85jc.com
 4。配制VSFTP，FVSFTP的运行有两（电脑没声音）种模式，一种是stardard "initd模式，另外一种是xinetd模式，上面我们所说的就是stardard initd运行模式。两（电脑没声音）种模式运行机制不是相同的，stardard initd模式，适合专业FTP，且FTP总是一直有人访问，占用资源也是比较大，如果您的FTP总是有人访问和登入。就要用这种模式。如果您的FTP访问人数比较小，建议您用xinetd模式。Xinetd模式，是当用户请求时，vsftpd才会启动。
不同的环境，当然得用不同的启动模式。
如果想了解更多的，请在本帖后面跟帖，我会慢慢补充xinetd模式，以及虚拟用户如何设置方面的问题。
1]我们主要把vsftp的配制文件改一下就行了。配制文件在/etc/vsftpd/vsftpd.conf，用您喜欢的编辑器打开。请参考下面的配制文件。
# Example config file /etc/vsftpd.conf
#
# The default compiled in settings are very paranoid. This sample file
# loosens things up a bit, to make the ftp daemon more usable.
#
# Allow anonymous FTP?
Anonymous_enable=YES
#
# Uncomment this to allow local users to log in.
Local_enable=YES
#
# Uncomment this to enable any form of FTP write command.
Write_enable=YES
#
# Default umask for local users is 077. You may wish to change this to 022,
# if your users expect that (022 is used by most other ftpd's)
local_umask=022
#
# Uncomment this to allow the anonymous FTP user to upload files. This only
# has an effect if the above global write enable is activated. Also, you will
# obviously need to create a directory writable by the FTP user.
#anon_upload_enable=YES
#
# Uncomment this if you want the anonymous FTP user to be able to create
# new directories.
#anon_mkdir_write_enable=YES
#
# Activate directory messages - messages given to remote users when they
# go into a certain directory.
Dirmessage_enable=YES
#
# Activate logging of uploads/downloads.
Xferlog_enable=YES
#
# Make sure PORT transfer connections originate from port 20 (ftp-data).
Connect_from_port_20=YES
#
# If you want, you can arrange for uploaded anonymous files to be owned by
# a different user. Note Using "root" for uploaded files is not
# recommended
#chown_uploads=YES
#chown_username=whoever
#
# You may override where the log file goes if you like. The default is shown
# below.
#xferlog_file=/var/log/vsftpd.log
#
# If you want, you can have your log file in standard ftpd xferlog format
xferlog_std_format=YES
#
# You may change the default value for timing out an idle session.
#idle_session_timeout=600
#
# You may change the default value for timing out a data connection.
#data_connection_timeout=120
#
# It is recommended that you define on your system a unique user which the
# ftp server can use as a totally isolated and unprivileged user.
#nopriv_user=ftpsecure
#
# Enable this and the server will recognise asynchronous ABOR requests. Not
# recommended for security (the code is non-trivial). Not enabling it,
# however, may confuse older FTP clients.
#async_abor_enable=YES
#
# By default the server will pretend to allow ASCII mode but in fact ignore
# the request. Turn on the below options to have the server actually do ASCII
# mangling on files when in ASCII mode.
# Beware that turning on ascii_download_enable enables malicious remote parties
# to consume your I/O resources, by issuing the command "SIZE /big/file" in
# ASCII mode.
# These ASCII options are split into upload and download because you may wish

[1] [2]  下一页

上一篇：Redhat局域网安装的解决办法3